Contoh Program Mengontrol GSM pada Arduino

Posted By Batak-Techno-ID »

Selasa, 06 Februari 2018

     haloooo.. lae semua kali ini saya akan berbagi contoh program arduino pada pengontrolan modul GSM gateway pada arduino , semoga artikel ini bisa bermanfaat bagi lae-lae semua hahahh
copas aja lae , gratis kok lekkkk


#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#include <GSM.h>

#define PINNUMBER ""
// initialize the library instance
GSM gsmaAaccess;
GSM_SMS sms;

LiquidCrystal_I2C lcd(0x3F,16,2); //set the LCD address to 0x27 for a 20 char and 4 display

#define level_1   A3
#define level_2   A2
#define level_3   A1
#define level_4   A0
#define buzzer    12
#define selenoid  6
#define pompa     7

int i,j;
char isi_SMS[13],c;
char senderNumber[20];
char pompa_on[13]="#POMPA ON@";
int level1, level2, level3, level4;
boolean flag_sms,flag_level1,flag_level4,pump_on:


void setup(){
  lcd.backlight(); lcd.int();
  Serial.begin(9600);

  //put your setup code here, to run once:

  pinMode (level_1,INPUT);digitalWrite(level_1,HIGH);
  pinMode (level_2,INPUT);digitalWrite(Level_2,HIGH);
  pinMode (level_3,INPUT);digitalWrite(level_3,HIGH);
  pinMode (level_4,INPUT);digitalWrite(level_4,HIGH);
  pinMode (buzzer,OUTPUT);
  pinMode (pompa,OUTPUT);digitalWrite(pompa,HIGH);
  pinMode (selenoid,OUTPUT);digitalWrite(selenoid,HIGH);

  lcd.setCursor(0,0); lcd.print("READING GSMS ");
  boolean notConnected=true;
  while (notConnected)
  {if(gsmAccess.begin(PINNUMBER) == GSM_READY)
  notConnected=false;
 
  else

  {lcd.setCursor(0,0); lcd.print("GSM Not REARY ");
  Serial.println("GSM Not connected";
  delay(1000);
 
  }
 
}


dan ini hasil ujinya lek :